ATE Manufacturers and offers a wide range of products to cater to the Requirement of the 2/3 and
4 wheeler Industry,
Electric Motor, Gear-Box and transmission Manufacturing Industry.
COMPUTERIZED IC ENGINE TEST RIGS & ELECTRIC MOTOR TEST RIGS.
ANY OTHER CUSTOMIZED TEST SETUPS AS PER CUSTOMER REQUIREMENT
Air Gap Eddy Current Dynamometers .....
The E range of dynamometers provides a range of Eddy – Current machines designed for testing engines from 3 to 310 BHP.
Eddy current dynamometers are well known for their stability and suitability to operate in a closed loop mode. These provide Precise Control even at low loads and rapid changes in demands and provide Bidirectional operation
The rugged design of the power absorbing unit ensures a long operating life, even in the most demanding production and endurance testing environments. The rotor which is in form of a Spoke Disc results in low inertia. The balanced high rigidity shaft assembly on precision bearings ensures smooth operation. This long life is further enhanced by the nickel plating of critical components in contact with the water.
E Series Dynamometers feature a Rugged design & heavy duty Single coil I High quality aluminum bobbin. This ensures high reliability.
Speed is measured by a pulse sensor mounted adjacent to a 60 tooth wheel on the coupling while torque is measured by a high accuracy strain gauge load cell mounted between the trunnion bearings, supported casings and bedplate. Control is achieved by varying the excitation current to the coils. When used in conjunction with feed back signals for torque from the load cell and speed sensor closed loop can be provided.
ATE offers a variety of Control ; Monitoring instrumentation for controlling the tests & monitoring the test data. Numerous options are available such as drive shafts, guards, calibration systems, engine mounting frames, circulation pumps and cooling towers. See our System accessories pages for additional details.
